English Polish
Akademia Morska w Szczecinie

DSpace Home

DSpace/Manakin Repository

Title
Finite element analysis of the dynamically created portal in the huge machine tool of “travelling column” type

ISSN printed: 1733-8670, ISSN on-line: 2392-0378
Dounar, Stanislau1; Iakimovitch, Alexandre2; Jakubowski, Andrzej3
URI: https://repository.am.szczecin.pl/handle/123456789/2658
2021-03-31
In this paper, a special configuration for the huge multipurpose machine tool of “travelling column” type was investigated by the finite element analysis. Internal degrees of freedom of a bulky system consisting of the ram, stock, column, sledge and bed, were implemented by the hydrostatic guides. A simulation of coupling two assembled columns into the portal structure was completed. The results of this work showed that temporal joining raises the spindle static rigidity by 1.39–1.91 times depending on the direction (mostly longitudinal – along the X-axis). The simulation also revealed the robustness of a whole-machine resonance pattern (11.7–39.0 Hz) to “column–to–portal coupling”. Eight types of eigenmodes were analyzed for frequency intervals from 0 to 80 Hz. A decrease by 2.9 times of the resonance peaks of a frequency response function was observed in the case of a portal structure creation. In case of columns-to-portal transition, stable cutting just at resonance frequencies (resonance overriding) becomes allowable. Overall, the “Portal” structure is recommended for intermittent cutting machining by raised high spindle unit at frequencies below 40 Hz.
  1. Herrero, A. & Bueno, R. (2001) Development of the three axes travelling column ultraprecision milling machine. 10th International Conference on precision engineering in Iokohama: Initiatives of precision engineering at the beginning of the millennium, pp. 529–533. Japan,
  2. Jafarzadeh, E. & Movahhedy, M.R. (2017) Numerical simulation of interaction of mode coupling and regenerative chatter in machining. Journal of Manufacturing Processes 27, pp. 252–260.,
  3. López De Lacalle, L.N. & Lamikiz, A. (Eds.) (2008) Machine Tools for High Performance Machining. London: Springer-Verlag.,
  4. Lu, K., Lian, Z., Gu, F. & Liu, H. (2018) Model-based chatter stability prediction and detection for the turning of the flexible workpiece. Mechanical Systems and Signal Processing 100, pp. 814–826.,
  5. Muhammad, B.B., Wan, M., Feng, J. & Zhang, W.-H. (2017) Dynamic damping of machining vibration: a review. International Journal of Advanced Manufacturing Technology 89, pp. 2935–2952.,
  6. Munoa, J., Mancisidor, I., Loix, N., Uniarte, L.G., Barcena, R. & Zatarain M. (2013) Chatter suppression in the ram-type travelling column milling machines using biaxial inertial actuator. CIRP Annals 62 (1), pp. 407–410.,
  7. Olvera, D., López De Lacalle, L.N., Compean, F.I., Fz-Valdivielso, A., Lamikiz, A. & Campa, F.J. (2012) Analysis of tool tip radial stiffness of turn-milling centers. International Journal of Advanced Manufacturing Technologies 60, pp. 883–891.,
  8. Portentoso, M., Pennacchi, P. & Chatterton, S. (2017) Comparison of the dynamic response of two columns of milling machines made of standard carpentry and metal foam sandwiches. Journal of Vibration and Control 23 (17), pp. 2782–2794.,
  9. Stepan, G., Kiss, A.K., Ghalahamchi, B., Sopanen, J. & Bachrathy, D. (2017) Chatter avoidance in cutting highly flexible workpieces. CIRP Annals 66 (1), pp. 377– 380.,
  10. Vasilevich, Y.V., Dounar, S.S. & Karabaniuk, I.A. (2016) Finite element analysis of concrete filler influence on dynamic rigidity of heavy machine tool portal. Science & Technique 15 (3), pp. 233–241.,
  11. Vasilevich, Y.V., Dovnar, S.S., Truskovsky, A.S. & Shumsky, I.I. (2015) Modelling and analysis of dynamics in bearing system of drilling, milling and boring machine with mono-column. Science & Technique 3, pp. 9–19.,

Title

Finite element analysis of the dynamically created portal in the huge machine tool of “travelling column” type

Pages

Figures

7

Tables

2

ISSN printed

1733-8670

ISSN on-line

2392-0378

DOI

Type

Original scientific article

Journal

65 Scientific Journals of the Maritime University of Szczecin, no. 65 / 2021

Publisher

Scientific Journals Maritime University of Szczecin, Zeszyty Naukowe Akademia Morska w Szczecinie

Copyright Holder

Scientific Journals Maritime University of Szczecin, Zeszyty Naukowe Akademia Morska w Szczecinie

Published

2021-03-31

Recieved

2019-10-22

Accepted

2021-03-01

Funding

No data

Keywords

FEA, portal, travelling column, rigidity, resonance, torsion

URI:

https://repository.am.szczecin.pl/handle/123456789/2658

Language

English

Authors

Dounar, Stanislau1; Iakimovitch, Alexandre2; Jakubowski, Andrzej3

Affiliation

1 Belarusian National Technical University, Mechanical Engineering Faculty Nezalezhnasci 65, 220127 Minsk, Belarus,
2 Belarusian National Technical University, Mechanical Engineering Faculty Nezalezhnasci 65, 220127 Minsk, Belarus,
3 Maritime University of Szczecin, Faculty of Marine Engineering Waly Chrobrego 1-2, 70-500 Szczecin, Poland, a.jakubowski@am.szczecin.pl

Show full item record

Files in this item

Download paper in PDF format
Name: www-zn-am-65-137-...
Size: 846.75 KB
Format: PDF
Licence: CC BY 4.0
Download

This item appears in the following Collection(s)

Search repository

Advanced Search

Browse

My Account

RSS Feeds

XML

Cite